Sil-Poxy™

Sil-Poxy™

Sil-Poxy™为单组分粘合剂,专门用于粘合RTV模具硅胶与硅胶和其他基材,包括一些塑料(聚氨酯)、灰泥/陶瓷、织物等。
 
Sil-Poxy™可用于锡或铂金固化硅胶,并提供牢固而柔韧的高伸长率硅胶部件之间粘合。可以用Silc-Pig™硅胶颜料着色。固化后的粘合剂可耐风化、潮湿、紫外线和高温。
 
Sil-Poxy™可用于修复撕裂的硅胶模具。其他应用包括用于假肢和电子动画的硅胶粘合

特征


说明

Safety Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk.

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.

A clean, dry surface is essential for successful adhesive bonding. If possible, abrade surface and follow with solvent wipe before applying.

Because no two applications are quite the same, a small test application to determine suitability for your project is recommended if performance of this material is in question.

Dispensing Squeeze tube, taking care not allow air to enter tube before replacing cap. Unused product in tube exposed to air will cure quickly.

Applying - Apply adhesive to surface and mate parts. Material will begin to cure in 15 minutes. Pieces can be handled after 1 hour. Full cure is attained after 24 hours. Warmer temperatures (and higher humidity) will result in a faster cure. Lower temperature will retard cure.

介绍产品制作工艺的文章