Ease Release® 200

Ease Release® 200

Ease Release®200为优异的通用脱模剂,用于模具制造和浇注件。产品可用于聚氨酯弹性体、环氧树脂、聚酯树脂、RTV硅酮、橡胶和热塑性聚合物的脱模。Ease Release®200适用于铝、铬、RTV硅胶、环氧树脂,橡胶和钢模具。

特征


说明

Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and rubber gloves to minimize contamination risk. Skin contact may cause dryness.
 

Store and use material at room temperature (73°F/23°C). This product has a limited shelf life and should be used as soon as possible.


SHAKE WELL BEFORE USING

Applying - Thoroughly clean your mold with Mold Cleaner 2508 or any suitable cleaner to remove all traces of previous coatings and oils. Apply Ease Release® 200 using aerosol spray or spray equipment for bulk grades. Hold the can (or spray gun) 6 to 8 inches from the mold surface to ensure a light, even coating. When the molds are new or have been blasted with an abrasive, “season” the mold by applying a heavy coating of release. Heat the mold to process temperature, then wipe the excess with a rag and reapply a light coating of Ease Release® 200 before a regular molding. Ease Release® 200 is fast drying and requires no baking during the normal molding process. Reapply a light coating before each molding.

Finishing - Thorough cleaning of molded parts is required prior to staining, painting, or bonding.

介绍产品制作工艺的文章