Dragon Skin® 10 MEDIUM
Dragon Skin 10 Medium铂金硅胶
注意：产品包装可能有所不同
Dragon Skin硅胶是高性能铂金固化硅胶，应用广泛，从制作皮肤效果和其他电影特效，到制作用于浇注各种材料的生产模具。由于Dragon Skin硅胶卓越的物理性能和柔韧性，它们还用于医疗假肢和缓冲应用。Dragon Skin也用于多种工业领域，使用温度范围为-65°F至+450°F（-18°C至+232°C ）。
注意：产品包装可能有所不同
Dragon Skin硅胶是高性能铂金固化硅胶，应用广泛，从制作皮肤效果和其他电影特效，到制作用于浇注各种材料的生产模具。由于Dragon Skin硅胶卓越的物理性能和柔韧性，它们还用于医疗假肢和缓冲应用。Dragon Skin也用于多种工业领域，使用温度范围为-65°F至+450°F（-18°C至+232°C ）。
特征
- 经过时间考验的多功能特效材料：Dragon Skin 10 Medium铂金硅胶质地柔软、超强韧且富有弹性，在全球范围内被用于打造惊艳的皮肤和生物特效。添加Silc Pig硅胶颜料或Cast Magic特效粉末，能实现无数种色彩效果。固化后的硅胶还可以用Psycho Paint涂装系统进行上色。固化后的材料对皮肤安全，且通过了独立实验室的认证。
- 易于使用：Dragon Skin硅胶按重量或体积比1A:1B进行混合。液态硅胶可用Silicone Thinner硅胶稀释剂稀释，或用THI-VEX硅胶增稠剂增稠。硅胶在室温（73°F/23°C）下固化，收缩率极低。建议进行真空脱气处理，以最大程度减少固化硅胶中的气泡。
Dragon Skin 10硅胶的防火等级符合UL-94 HB标准，并且满足GB 8624 - 2012《建筑材料及制品燃烧性能分级》中的B1级要求（不包括“NV”配方）。
说明
Measuring and Mixing - Before you begin, pre-mix Part B thoroughly. After dispensing required amounts of Parts A and B into mixing container (1A:1B by volume or weight), mix thoroughly for 3 minutes making sure that you scrape the sides and bottom of the mixing container several times. After mixing parts A and B, vacuum degassing is recommended to eliminate any entrapped air. Vacuum material for 2-3 minutes (29 inches of mercury), making sure that you leave enough room in container for product volume expansion.
For best results, pour your mixture in a single spot at the lowest point of the containment field. Let the rubber seek its level up and over the model. A uniform flow will help minimize entrapped air. The liquid rubber should level off at least 1/2” (1.3 cm) over the highest point of the model surface.
Curing / Post Curing - Allow rubber to cure as prescribed at room temperature (73°F/23°C) before demolding. Do not cure rubber where temperature is less than 65°F/18°C. Optional: Post curing the mold will aid in quickly attaining maximum physical and performance properties. After curing at room temperature, expose the rubber to 176°F/80°C for 2 hours and 212°F/100°C for one hour. Allow mold to cool to room temperature before using.